CI 980

8 Channel Amplifier

$ 1499
less then .5 watt standby

Sometimes simplicity is what’s needed. The NAD CI 980 is a simple power amplifier, offering superb sound and robust reliability. Our best selling rack mount amplifier has been proven in the field time and again. Delivering a truly expansive sonic experience, the CI 980 will impress even the most experienced of listeners. NAD will redefine the way you view high performance distributed audio systems.

NAD CI 980 Multi Channel Amplifier

No worries, No hassle. System reliability and simple installation and unrivalled bang for buck were the primary objectives in the CI 980 design.  NAD is in the top tier of all amplifier brands, consistently winning awards for both performance and value for money. The CI 980 offers warm, expansive and intensely musical sound, designed to drive real world speaker loads. You will love the way the CI 980 brings out the best performance from any speaker for a remarkable listening experience. It is also extremely quiet with inaudible residual noise in no signal conditions, important when using efficient speakers in small spaces.

Full Disclosure Power

The CI 980 offers NAD’s offers the same sonic performance, as that found in some of the best- selling hi fi amplifiers of all time from our Classic Series range. As per NAD’s Full Disclosure Power (FDP) ratings, it’s capable of delivering a conservative 50 watts per channel at 8 ohms into all channels simultaneously, so no need to worry about a lack of power, or the amplifier becoming strained, when all zones are active in a multi-room system. The CI 980 is also bridgeable to 120 watts per channel into 8 ohms, and stability into 4 ohm speaker loads.

NAD Amplification

The CI 980 has 8 channels of clean, low distortion power set up in a 4 stereo zone configuration. Boasting 50 watts per channel, the CI 980 is designed to drive low impedance speakers and long wire runs. By utilizing the latest high efficiency switching amplifier technology, the CI 980 is an all-new design built to be small, light, and very energy efficient, with superb musical sound quality for which NAD is known.

Rack Space Efficiency and Reliability

The CI 980 voltage is universal, which can be important in marine and avionics installations. The amplifier is fully protected from short-circuiting and overheating, plus operation is automatically restored after the condition is rectified. Indicator lamps for each zone show protection status and amplifier clipping. With <0.5W Standby consumption and highly efficient power delivery, the CI 980 will impress with its energy efficiency. The 2U rack height and included rack ears make excellent use of precious rack space, while the highly efficient amplifier produces very little heat, allowing multiple CI 980s to be used in a single rack. Thermostatically controlled forced air-cooling ensures a long trouble-free service life. Phoenix speaker connection blocks make installation a snap, and a selectable local or global input further simplifies wiring.

Simplicity in Integration

The CI 980 offers a choice of DC trigger or signal-sensing auto on with auto shut-off. Our signal sensing circuit employs a sophisticated music sensing circuit to prevent the false triggers common with noisy source components, or other types of interference noise like RF leakage or ground loops. Rack install is made neat and efficient, thanks to inputs and triggers that offer daisy chain outputs.

System Suggestion

Combine the CI 890 with the CI 580 V2 4- zone BluOS rack mount streamer or the Bluesound NODE to create a complete hi- res multi-room package of incredible value and quality. Or match it with the T 758 V3i and T 778, utilizing their additional pre-outs to power additional effect channels or a 2nd zone, the power and performance of the CI 980 is perfectly matched for this use.

Key Features

  • 8 Channels x 50 Watts @ 8 Ohms
  • Bridgeable to 4 channels X 120 Watts @ 8 Ohms
  • Effectively handles long cable runs and difficult speaker loads
  • 4 stereo RCA inputs with loop through
  • Global Input/Output
  • Input gain adjustment for all zones
  • Stereo/mono/bridge mode selector for each zone
  • 2U Rack height
  • Indicator lamps for each zone that show protection status and amplifier clipping
  • 5W Standby Mode
  • Thermostatic fan cooling with front vents
  • Universal voltage Power Supply to accommodate marine installations
  • Multiple Power-up options including Auto Sense turn on and 12V trigger
  • Rack ears included

ci980_rear_panel_drawing_front

 

 

 

 

ci980_rear_panel_drawing_back

Key Features

  • Eight channels of clean, low distortion power set up in four stereo zone configuration
  • 50W x 8 @ 8 Ohms; 60W x 8 @ 4 Ohms; 120W @ 8 Ohms in Bridge Mode
  • Universal voltage to accommodate marine or avionics installations
  • Compact 2U rack height with rack ears
  • Phoenix speaker connection blocks
  • Detachable power cable for easy service and upgrades
  • Indicator lamps for each zone that show protection status and amplifier clipping
  • <0.5W standby consumption
  • <0.03% THD; <0.04% IMD (SMPTE, CCIR)
  • >86dBA referenced to 1W

Overall Specifications

  • Continuous Output Power
  • 8 Ohms
  • 8 x 50W (ref. rated THD, 20Hz-20Hz, all channels driven)
  • 4 Ohms
  • 8 x 60W
  • 8 Ohms Bridge Mode
  • 120W
  • Rated THD (250mW to rated power, CCIF IMD, DIM 100)
  • <0.03% (ref. 20Hz-20kHz)
  • Clipping Power
  • >155W (ref. 1kHz, 8 Ohms, 0.1% THD)
  • Damping Factor
  • >150 (ref. 8 Ohms, 50Hz and 1kHz)
  • Input Sensitivity
  • 1.1V (ref. rated power)
  • Voltage Gain
  • 33dB
  • Frequency Response
  • 20Hz-20kHz ±1dB
  • Signal/Noise Ratio, A-Weighted
  • >80dB (ref. 1W/8 Ohms)
    >100dB (ref. 50W)
  • Miniumu Input Signal to Trigger (auto sense mode)
  • >20mV
  • Time to Automatic Standby (without signal at input sense mode)
  • 10 minutes
  • Rated Power
  • 600W (120V 60Hz, 230V 50Hz)
  • Idle Power
  • <26W
  • Standby Power
  • <0.5W

Weight & Dimensions

  • Gross Dimensions* (W x H x D)
  • 483 x 105 x 323mm (19 1/16 x 4 3/16 x 12 3/4”)**
  • Net Weight
  • 5.72kg (12.6lb)
  • Shipping Weight
  • 7.1kg (15.65lb)

*Gross dimensions include feet, extended buttons and rear panel terminals.

**Non-metric measurements are approximate.

Technology

nad_website_technologyicons_less-than-0-5-watt-standby

Close popup

Um zu den Websites unserer Vertriebspartner in Deutschland, der Schweiz oder Österreich zu gelangen, klicken Sie bitte auf die entsprechende Flagge unten. Sie verlassen die Website von NAD. Wir sind nicht für den Inhalt oder die Verfügbarkeit dieser Websites verantwortlich und bitten Sie, deren Sicherheits- und Datenschutzrichtlinien zu lesen, da sie von denen von NAD abweichen können. Andernfalls, wenn Sie auf nadelectronics.com bleiben möchten, wählen Sie bitte "bleiben".

To continue to our distribution partners’ websites in Germany, Switzerland or Austria, please click on the appropriate flag below. You will be leaving the NAD website and we are not responsible for the content or availability of these sites and would ask you to read their security and privacy policies as they may differ from those of NAD. Otherwise, if you wish to stay on nadelectronics.com, please select "Bleiben".