KEY FEATURES
5 story sections available. Tab to navigate.
Story section 1 of 5.Contains an image.Press Tab to navigate to next section.
Power That Commands Attention (Section 1 of 5)
The M10 V3 uses a HybridDigital amplifier based on nCore Class D technology to deliver 100W per channel of clean, efficient power. It handles a wide range of speakers with control and consistency, even at higher volumes. Whether you're enjoying background music or focused listening, the M10 V3 maintains a clear and stable signal, delivering dependable performance without unnecessary bulk or heat.
Section 1 of 5
Story section 2 of 5.Contains an image.Press Tab to navigate to next section.
Flexible by Design, Ready for More (Section 2 of 5)
Built for real-world systems, the M10 V3 connects easily to your existing passive speakers and supports wireless Dolby Digital 4.0, 4.1, or 4.2 setups with BluOS-enabled rear channels and dual subs. It fits seamlessly into your space and scales up as needed. From stereo to surround, the M10 V3 gives you room to grow without
overcomplicating your system.
Section 2 of 5
Story section 3 of 5.Contains an image.Press Tab to navigate to next section.
Simplicity meets Performance (Section 3 of 5)
This is plug-and-play hi-fi at its finest. The latest-generation ESS Sabre 32-bit/768kHz DAC extracts extraordinary depth, texture, and precision from every source. With full MQA decoding, lossless and high-res streaming, and a dedicated MM phono stage with textbook-accurate RIAA equalization, it brings out the best in every format. The M10 V3 is the perfect addition for the audiophile who values both simplicity and performance.
Section 3 of 5
Story section 4 of 5.Contains an image.Press Tab to navigate to next section.
Perfectly Tuned for Your Space (Section 4 of 5)
Dirac Live Room Correction and upcoming Dirac Live Bass Control support adapt the M10 V3 to your space, accounting for subtle shifts in acoustics to deliver consistent, high-precision sound. This optimizes speaker and subwoofer integration for cleaner bass, better imaging, and fewer room-induced distortions. Store multiple profiles for different conditions, then switch with a tap on the BluOS app or the BC1 remote for perfect sound, any time.
Section 4 of 5
Story section 5 of 5.Press Tab to navigate to next section.
Designed to Disappear, Built to Command (Section 5 of 5)
Encased in brushed aluminum and Gorilla Glass, the M10 V3 blends into your decor, but its performance stands out. Stream music from Spotify Connect, TIDAL Connect, AirPlay 2, or your network drive, or control it all with the BluOS app, touchscreen, voice, or BC1 remote. With smart home integration and 63-zone support, your entire setup responds the way a modern system should: instantly, intuitively, and without limits.
Section 5 of 5
SPECIFICATIONS
| Specification | Details |
|---|---|
GENERAL SPECIFICATIONS |
|
| Continuous output power into 8 ohms and 4 ohms | >100W (ref. 20 Hz-20 kHz at rated THD, both channels driven) |
| THD (20 Hz – 20 kHz) | <0.03 % (250 mW to 100 W, 8 ohms and 4 ohms) |
| Signal-to-Noise Ratio | >85.1 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms) |
| Clipping power | >130 W (at 1 kHz 8 ohms 0.1 % THD) >230 W (at 1 kHz 4 ohms 0.1 % THD) |
| IHF dynamic power | 8 ohms: 160 W 4 ohms: 300 W |
| Damping factor | >190 (ref. 8 ohms, 20Hz to 6.5kHz) |
| Frequency response | ±0.6 dB (20 Hz - 20 kHz) |
| Tone controls | Treble: ±6.0 dB at 20 kHz Bass: ±6.0dB at 60 Hz |
| Channel separation | >83 dB (1 kHz) >70.5 dB (10 kHz) |
| Input sensitivity (for 100 W in 8 ohms) | Line In: 456 mV Digital In: -13.23 %FS |
| Standby power | 0.5W |
DAC SECTION |
|
| Supported audio file formats | MP3, AAC, WMA, OGG, WMA-L, ALAC, OPUS |
| Hi-Resolution audio formats | MQA, FLAC, WAV, AIFF, Supports converted DSD playback via the BluOS desktop app (only) |
| Sampling rate | up to 24 bit/192 kHz |
BluOS SECTION |
|
| Supported operating systems | Plays music from network shares on the following desktop operating systems: Microsoft Operating Systems and Mac OS X versions |
| User interface mobile operating system BluOS | BluOS - Free Android and iOS App available online at Google Play and Apple App store |
| Supported cloud services* | Amazon Music Ultra HD, Spotify (also support for Spotify Lossless), Tidal Max, Deezer, Qobuz, Qobuz Connect, HDtracks, HighResAudio, Murfie, JUKE, Napster, Slacker Radio, KKBox, Bugs |
| Free internet radio* | TuneIn Radio, iHeartRadio, Calm Radio, Radio Paradise |
| Bluetooth quality | Bluetooth aptX HD built-in |
| Bluetooth connectivity | Two-Way (Receive and Headphone modes) |
| Network connectivity | Gigabit Ethernet RJ45, Wi-Fi 5 |
DIMENSION AND WEIGHT |
|
| Gross dimensions | 215 x 100 x 260 mm 8 1/2 x 3 15/16 x 10 1/4 inches |
| Shipping weight | 5 kg (11 lbs) |
NOTE |
|
| *Specifications subject to change without notice. | |
Table with 23 specifications loaded. Use Tab key to navigate through specification labels and values.
FIND A DEALER
Visit an authorised NAD dealer to experience our products and hear the difference for yourself.
FIND A DEALER