M32

DIRECT DIGITAL AMPLIFIER
ARCHIVE
THIS PRODUCT IS NO LONGER FOR SALE

SPECIFICATIONS

Product specifications table organized by category with specification names and corresponding values.
Specification Details

Key Features

DirectDigital amplification, combining all preamplification and power amplification functions into a single amplifying stage Four MDC slots with three for customization and expandability, all are 24/192 capable
AES/EBU, Coax and Optical, USB A and USB B MM Phono Input
Single-ended Line Inputs Asynchronous USB 2.0 (24/192) Computer Input
AES/EBU, Coax, and Optical 924/192 Inputs Subwoofer Crossover with selectable Crossover Frequency and Levels
Crossover Frequency and Levels Headphone Amplifier
Two sets of Speaker Outputs for Bi-wiring Remote Control HTRM-2

General Specifications

Continuous Output Power into 8 Ohm and 4 Ohm 180W (ref. 20Hz-20kHz at rated THD, both channels driven)
THD (20Hz-20kHz) 0.005% (250mW to 180W, 8 Ohm and 4 Ohm)
Signal/Noise Ratio >92dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
Clipping Power >195W (at1kHz, 0.1% THD)
8 Ohm 220W
4 Ohm 360W
2 Ohm 400W
Peak Output Current >30A (in 1 Ohm, 1ms)
Damping Factor >160 (ref. 8 Ohms, 20Hz-6.5kHz)
Frequency Response ±0.3dB (ref. 20Hz-96kHz at 192kHz)
Bit Rate/Sample Rate up to 24 bit/192kHz

Preamplifier Specifications

Input Impedance (R and C) 10 kilohms + 100pF
Maximum Input Signal >4Vrms (ref. 0.1% THD)
Output Impedance 240 Ohms
Input Sensitivity 146mV (ref. 500mV out, Volume Maximum)
Maximum Voltage Output - IHF load >2V (ref. 0.1% THD)
Tone Controls Treble: ±10dB at 20kHz Bass: ±10dB at 60Hz Balance: -10dB
Input Sensitivity 2.38mV (ref. 400mV out, Volume Maximum)
Maximum Input Signal 1 1kHz >66mV rms (ref. 0.1% THD)
Output Impedance 0.5 Ohm

Power Consumption

at Auto Standby ON 0.5 Watts*
OFF mode (Power switched OFF) 0.4 Watts

Weights & Dimensions

Dimensions 435 x 133 x 396mm (17 1/8 x 5 1/4 x 15 5/8”)
Net Weight 9.8kg (21.6lb)
Shipping Weight 18.5kg (40.8lb)

Accessories

Technology

*Specifications subject to change without notice.
Table with 31 specifications loaded. Use Tab key to navigate through specification labels and values.

FIND A DEALER

Visit an authorised NAD dealer to experience our products and hear the difference for yourself.

FIND A DEALER