M32

DIRECT DIGITAL AMPLIFIER
ARCHIVE
THIS PRODUCT IS NO LONGER FOR SALE

SPECIFICATIONS

Product specifications table organized by category with specification names and corresponding values.
Specification Details

Key Features

DirectDigital™ amplification, combining all preamplification and power amplification functions into a single amplifying stage Four MDC slots with three for customization and expandability, all are 24/192 capable
AES/EBU, Coax and Optical, USB A and USB B MM Phono Input
Single-ended Line Inputs Asynchronous USB 2.0 (24/192) Computer Input
AES/EBU, Coax, and Optical 924/192 Inputs Subwoofer Crossover with selectable Crossover Frequency and Levels
Crossover Frequency and Levels Headphone Amplifier
Two sets of Speaker Outputs for Bi-wiring Remote Control HTRM-2

General Specifications

Continuous Output Power into 8 Ohm and 4 Ohm 180W (ref. 20Hz-20kHz at rated THD, both channels driven)
THD (20Hz-20kHz) 0.005% (250mW to 180W, 8 Ohm and 4 Ohm)
Signal/Noise Ratio >92dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)
Clipping Power >195W (at1kHz, 0.1% THD)
8 Ohm 220W
4 Ohm 360W
2 Ohm 400W
Peak Output Current >30A (in 1 Ohm, 1ms)
Damping Factor >160 (ref. 8 Ohms, 20Hz-6.5kHz)
Frequency Response ±0.3dB (ref. 20Hz-96kHz at 192kHz)
Bit Rate/Sample Rate up to 24 bit/192kHz

Preamplifier Specifications

Input Impedance (R and C) 10 kilohms + 100pF
Maximum Input Signal >4Vrms (ref. 0.1% THD)
Output Impedance 240 Ohms
Input Sensitivity 146mV (ref. 500mV out, Volume Maximum)
Maximum Voltage Output - IHF load >2V (ref. 0.1% THD)
Tone Controls Treble: ±10dB at 20kHz Bass: ±10dB at 60Hz Balance: -10dB
Input Sensitivity 2.38mV (ref. 400mV out, Volume Maximum)
Maximum Input Signal 1 1kHz >66mV rms (ref. 0.1% THD)
Output Impedance 0.5 Ohm

Power Consumption

at Auto Standby ON 0.5 Watts*
OFF mode (Power switched OFF) 0.4 Watts

Weights & Dimensions

Dimensions 435 x 133 x 396mm (17 1/8 x 5 1/4 x 15 5/8”)
Net Weight 9.8kg (21.6lb)
Shipping Weight 18.5kg (40.8lb)

Accessories

Technology

*Specifications subject to change without notice.
Table with 31 specifications loaded. Use Tab key to navigate through specification labels and values.

FIND A DEALER

Visit an authorised NAD dealer to experience our products and hear the difference for yourself.

FIND A DEALER