KEY FEATURES
4 story sections available. Tab to navigate.
Story section 1 of 4.Contains an image.Press Tab to navigate to next section.
Designed for Compact Living Spaces (Section 1 of 4)
The D 3045 is intended for systems where space is limited but sound quality remains a priority. Its compact enclosure allows it to integrate easily into modern living rooms, PC desktop systems, or workstation setups without drawing attention to itself. At the same time, its engineering helps smaller systems sound fuller, clearer, and more controlled than expected.
Section 1 of 4
Story section 2 of 4.Contains an image.Press Tab to navigate to next section.
HybridDigital Power with Greater Control (Section 2 of 4)
With 60 watts per channel of HybridDigital amplification, the D 3045 provides the current and stability needed to drive a wide range of speakers effectively. Sound remains clear and controlled as volume levels increase, helping music and dialogue retain detail and balance. This makes the D 3045 well suited to both focused music listening and everyday TV use.
Section 2 of 4
Story section 3 of 4.Contains an image.Press Tab to navigate to next section.
Built for Today’s Sources (Section 3 of 4)
The D 3045 supports the mix of music and video sources commonly found in modern systems. HDMI ARC allows a direct connection to a television with simple control, while USB, optical, and coaxial inputs support high-quality digital playback. Bluetooth with aptX HD adds wireless flexibility, and a built-in MM phono stage ensures vinyl playback is fully supported.
Section 3 of 4
Story section 4 of 4.Contains an image.Press Tab to navigate to next section.
Flexible System Building (Section 4 of 4)
The D 3045 includes features that allow systems to grow or adapt over time. Pre-out and subwoofer connections make it easy to extend low-frequency performance or add external amplification, while the dedicated headphone output supports private listening. These options give the D 3045 lasting usefulness as listening habits and system needs evolve.
Section 4 of 4
SPECIFICATIONS
| Specification | Details |
|---|---|
PREAMPLIFIER SECTION LINE INPUT/PRE OUT |
|
| THD (20Hz – 20kHz) | <0.003% at 2V out |
| Signal-to-Noise Ratio | >100dB (IHF, A-weighted, ref. 500mV out, unity gain) |
| Channel separation | >85dB (1kHz) >80dB (10kHz) |
| Input impedance (R and C) | 47kohms + 220pF |
| Maximum input signal | >5.5Vrms (ref. 0.1% THD) |
| Output impedance | 400 Ohms |
| Input sensitivity | 82mV (ref. 500mV out, Volume maximum) |
| Frequency response | ±0.2dB (20Hz - 20kHz) |
| Maximum voltage output - IHF load | >4V (ref. 0.1% THD) |
PHONO INPUT / PRE OUT |
|
| THD (20Hz – 20kHz) | <0.015% at 2V out |
| Signal-to-Noise Ratio | >82dB (200 Ohm source, A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out) |
| Input sensitivity | 1.35mV (ref. 500mV out, Volume maximum) |
| Maximum input signal at 1kHz | >90mVrms (ref. 0.1% THD) |
| Frequency response | ±0.3dB (20Hz - 20kHz) |
LINE INPUT / HEADPHONE OUT |
|
| THD (20Hz – 20kHz) | <0.003% at 120mW |
| Signal-to-Noise Ratio | >90dB (32 Ohm load; A-weighted, ref. 500mV out, unity gain) |
| Frequency response | ±0.3dB (20Hz - 20kHz) |
| Output impedance 2 Ohms | Maximum headphone output - 32 Ohm load <8V (ref. 0.1% THD) |
GENERAL SPECIFICATIONS LINE INPUT/SPEAKER OUT |
|
| Continuous output power into 4 and 8 Ohms | 60W (ref. 20Hz-20kHz at 0.03% THD, both channels driven) |
| THD (20Hz – 20kHz) | <0.005% (at 1W, 4 and 8 ohms) |
| Signal-to-Noise Ratio | >98dB (A-weighted, 500mV input, ref. 2.828V out in 4 Ohms) |
| Clipping power | >80W (at 1kHz 4 Ohms 0.1% THD) |
| IHF dynamic power | 8 Ohms : 80W 4 Ohms : 150W 2 Ohms : 200W |
| Peak output current | >18A (in 1 Ohm, 1ms) |
| Damping factor | >300 (ref. 8 Ohms, 20Hz to 6.5kHz) |
| Frequency response | ±0.3dB (20Hz - 20kHz) |
| Channel separation | >75dB (1kHz) >70dB (10kHz) |
| Input sensitivity | 260mV (for 30W in 4 Ohms) |
| Supports bit rate/sample rate | up to 24 bit/192kHz (digital source) up to 24 bit/384kHz (computer source) |
| Standby power | <0.5W |
DIMENSION AND WEIGHT |
|
| Gross dimensions (W x H x D)* | 70 x 235 x 265 mm 2 13/16 x 9 5/16 x 10 7/16 inches** |
| Net weight | 3.6kg (7.9lb) |
| Shipping weight | 2.6kg (5.7lb) |
| *Specifications subject to change without notice. | |
Table with 33 specifications loaded. Use Tab key to navigate through specification labels and values.
FIND A DEALER
Visit an authorised NAD dealer to experience our products and hear the difference for yourself.
FIND A DEALER