KEY FEATURES
4 story sections available. Tab to navigate.
Story section 1 of 4.Contains an image.Press Tab to navigate to next section.
Powerful HybridDigital Amplification (Section 1 of 4)
The C 379 uses NAD’s HybridDigital UcD amplifier design to deliver 80 watts per channel of clean, dynamic power. Its fully balanced configuration reduces noise and distortion for a clearer, more controlled presentation across all volumes. Music feels effortless and detailed, from quiet passages to energetic peaks.
Section 1 of 4
Story section 2 of 4.Contains an image.Press Tab to navigate to next section.
Detailed, Low-Noise Digital Playback. (Section 2 of 4)
A high-performance 32-bit digital-to-analogue stage provides low noise, wide dynamic range, and accurate stereo imaging. This precise conversion allows your favourite recordings to sound more open and revealing, helping you hear subtle textures and details that elevate everyday listening. The result is a natural, engaging presentation that brings you closer to the performance.
Section 2 of 4
Story section 3 of 4.Contains an image.Press Tab to navigate to next section.
Upgradeable with MDC2 (Section 3 of 4)
With two MDC2 expansion slots, the C 379 adapts as your system evolves. Adding the optional MDC2 BluOS-D module enables high-resolution streaming, whole-home music control, and Dirac Live Room Correction through the BluOS Controller app. This upgrade path keeps the amplifier current with new features and technologies for years to come.
Section 3 of 4
Story section 4 of 4.Contains an image.Press Tab to navigate to next section.
Connected for Modern Listening (Section 4 of 4)
HDMI eARC, a Moving Magnet phono stage, dual subwoofer outputs, and a dedicated headphone amplifier provide flexible options for all your music sources. Whether you are streaming wirelessly with aptX HD Bluetooth, enjoying vinyl, or connecting your TV, the C 379 integrates easily into your system. Its thoughtful design makes it simple to enjoy high-quality audio in any setup.
Section 4 of 4
SPECIFICATIONS
| Specification | Details |
|---|---|
LINE INPUT, PRE-OUT (ANALOG BYPASS ON) |
|
| THD (20Hz - 20kHz) | <0.002 % at 2 V out |
| Signal-to-Noise Ratio | >106dB (IHF; A-weighted, ref. 500 mV out, unity gain) |
| Channel separation | >100dB (1 kHz); >90 dB (10 kHz) |
| Input Impedance (R and C) | 56.2 kohms + 100 pF |
| Maximum input signal | >4.6 Vrms (ref. 0.1 % THD) |
| Output impedance | Source Z + 320 ohms |
| Input sensitivity | 257 mV (ref. 500 mV out, Volume maximum) |
| Frequency response | ±0.3 dB (20 Hz – 20 kHz) |
| Maximum voltage output -IHF load | >4.5 V (ref. 0.1 % THD) |
PHONO INPUT, PRE-OUT (ANALOG BYPASS ON) |
|
| THD (20Hz - 20kHz) | <0.01% at 2 V out |
| Signal-to-Noise Ratio | >83dB (200 ohms source; A-weighted, ref. 500 mV out) |
| Input sensitivity | 46 kohms/100 pF |
| Frequency response | ±0.3 dB (20 Hz – 20 kHz) |
| Maximum input signal at 1kHz | >80 mVrms (ref. 0.1 % THD) |
LINE INPUT, HEADPHONE OUT (ANALOG BYPASS ON) |
|
| THD (20Hz - 20kHz) | <0.002% at 1V out |
| Signal-to-Noise Ratio | >101 dB (32 ohms loads; A-WTD, ref. 1V out, unity gain |
| Frequency response | ±0.3 dB (20 Hz – 20 kHz) |
| Channel separation | >62 dB at 1kHz |
| Output impedance | 2.2 Ohms |
LINE IN, SPEAKER OUT (ANALOG BYPASS ON) |
|
| Continuous output power into 8 ohms | 80W (ref. 20 Hz-20 kHz at rated THD, both channels driven) |
|
Continuous output power into 8 Ohms (Bridge mode) |
>300W |
| THD (20 Hz – 20 kHz) | <0.03% (250 mW to 120 W, 8 ohms and 4 ohms) |
| Signal-to-Noise Ratio | >85 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms) |
| Clipping power | >110W (at 1 kHz 0.1 % THD) |
| IHF dynamic power | 8 ohms: 140W |
| Peak output current | >20A (in 1 ohm, 1ms) |
| Damping factor | >300 (ref. 8 ohms, 20Hz to 6.5kHz) |
| Frequency response | >±0.3 dB (20 Hz – 20 kHz) |
| Channel separation | >75dB (1 kHz) |
| Input sensitivity (for 80 W in 8 ohms) | Line In: 440 mV |
| Supports bit rate/sample rate | up to 24 bit/192 kHz |
| Frequency band | 2.402G- 2.480G |
| Standby power | >0.5W |
| Network standby power | >2W |
DIMENSIONS AND WEIGHT |
|
| Gross dimensions (W x H x D)** | 435 x 100 x 410mm (17 1/4 x 4 x 16 3/16 inches) |
| Net Weight | 9.04 kg |
| Shipping weight | 10.88 kg |
| *Specifications subject to change without notice. | |
Table with 37 specifications loaded. Use Tab key to navigate through specification labels and values.
FIND A DEALER
Visit an authorised NAD dealer to experience our products and hear the difference for yourself.
FIND A DEALER