CI 940
MULTI-CHANNEL AMPLIFIER
SPECIFICATIONS
| Specification | Details |
|---|---|
Key Features |
|
| Four channels of clean, low distortion power set up in two stereo zone configuration | 35W x 4 @ 8 Ohms/4 Ohms 70W x 2 @ 8 Ohms in Bridge Mode |
| Compact 2U rack height with rack ears | Phoenix speaker connection blocks |
| Detachable power cable for easy service and upgrades | Indicator lamps for each zone that show protection status and amplifier clipping |
| <0.5W standby consumption | <0.03% THD; <0.04% IMD (SMPTE, CCIR) |
Overall Specifications |
|
| 8 Ohms/4 Ohms | 4 x 35W (ref. rated THD, 20Hz-20Hz, all channels driven) |
| 8 Ohms Bridge Mode | 2 x 70W (ref. 20Hz-20kHz) |
| Rated THD (250mW to rated power, CCIF IMD, DIM 100) | <0.03% (ref. 20Hz-20kHz) |
| 8 Ohms | 55W |
| 4 Ohms | 85W |
| 2 Ohms | 95W |
| Damping Factor | >180 (ref. 8 Ohms, 50Hz and 1kHz) |
| Input Sensitivity | 270mV (ref. rated power) |
| Voltage Gain | 35dB |
| Frequency Response | ref. 20Hz-20kHz ±0.2dB -3dB at 3Hz and 100kHz |
| Signal/Noise Ratio, A-Weighted | >95dB (ref. 1W) >110dB (ref. 35W) |
| Minimum Input Signal to Trigger (auto sense mode) | >20mV |
| Time to Automatic Standby (without signal at input sense mode) | 10 minutes |
| Rated Power | 270W (120V 60Hz, 230V 50Hz) |
| Idle Power | <55W |
| Standby Power | <0.5W |
General |
|
| Gross Dimensions* (W x H x D) | 483 x 105 x 323mm (19 1/16 x 4 3/16 x 12 3/4”)** |
| Net Weight | 6.96kg (15.35lb) |
| Shipping Weight | 8.4kg (18.5lb) |
Technology |
|
| *Specifications subject to change without notice. | |
Table with 23 specifications loaded. Use Tab key to navigate through specification labels and values.
FIND A DEALER
Visit an authorised NAD dealer to experience our products and hear the difference for yourself.
FIND A DEALER