C 326BEE
STEREO INTEGRATED AMPLIFIER
SPECIFICATIONS
| Specification | Details |
|---|---|
Key Features |
|
| 50W x 2 Continuous Power into 4 Ohms and 8 Ohms | 100W, 150W, 200W IHF Dynamic power into 8, 4 and 2 Ohms, respectively |
| PowerDriveTM circuit | NAD SR 8 Full System Remote control |
| Headphone socket | Front panel Media Player (MP) input for attaching portable MP3 Player |
| Relay Input Switching | Holmgren Toroidal Power transformer |
| 7 Line inputs, including two tape in/outs | All discrete circuitry |
| Short signal path from input to output | All sockets Gold plated |
| Tone controls defeat switch | Main-amp input & pre-amp outputs |
| Subwoofer (mono) Out | Soft ClippingTM |
| IR Input/Output | 12 volt trigger out |
| Detachable IEC Power Cable | <1W Standby Power Consumption |
Preamplifier |
|
| THD (2V in 2V out, CCIF IMD, DIM 100) | >0.004% (ref. 20Hz – 20kHz) |
| Signal/Noise ratio IHF | >100dB (A-weighted, ref. 500mV) |
| 1kHz | >80dB |
| 10kHz | >70dB |
| Input impedance (R and C) | 100 kilohm+ 320pF |
| Maximum input signal | >8Vrms (ref. 0.1 THD) |
| Pre out | 75 Ohm |
| Tape out | Source Z + 1 kilohm |
| Input sensitivity | 159mV (ref. 500mV out) |
| Frequency response | ±0.1dB (ref. 20Hz - 20kHz, Tone defeat ON) |
| IHF load | >10V (ref. 0.03% THD) |
| 600 Ohm load | >10V (ref. 0.03% THD) |
| Treble | ±5dB at 10kHz |
| Bass | ±8dB at 100Hz |
Power Amplifier |
|
| Continuous output power into 8Ω and 4Ω (Stereo) | >50W (ref. rated THD, 20Hz-20kHz, both channels driven) |
| Rated THD (CCIF IMD, DIM 100) | <0.009% (ref. 20Hz - 20kHz) |
| Clipping power | >65W (ref. 1kHz 1% THD) |
| 8 Ohm | 100W |
| 4 Ohm | 150W |
| 2 Ohm | 200W |
| Peak output current | >20A (ref. 1 Ohm, 1ms) |
| Signal/Noise ratio | >100dB (A-weighted, ref. 1W) |
| Damping factor | >100 (ref. 8 Ohm, 50Hz and 1kHz) |
| Frequency response | ±0.1dB (ref. 20Hz - 20kHz) |
| Input impedance | 20 kilohm + 1nF |
| Input sensitivity | 630mV (ref. rated power) |
| Voltage gain | 29dB |
| Headphone output impedance | 68 Ohms |
| Channel separation 1kHz | >80dB |
| 10kHz | >70dB |
| Output resistance | <100 Ohms |
| Output current | 50mA |
| Output voltage | +12V |
Overall Specs |
|
| THD (250mW to rated power, CCIF IMD, DIM 100) | <0.009% (ref. 20Hz - 20kHz) |
| Signal/Noise ratio | >94dB (A-weighted, ref. 1W) |
| Frequency response | ±0.2dB (ref. 20Hz - 20kHz, Tone Defeat ON) |
| 1kHz | >80dB |
| 10kHz | >70dB |
| Rated power | 290W (ref. 230V AC 50 Hz; 120V AC 60Hz) |
| Standby power | <1W |
| Idle power | <35W |
Weight & Dimensions |
|
| Net | 435 x 100 x 286mm |
| Gross* | 435 x 116 x 332mm |
| Net weight | 15.21lb (6.9kg) |
| Shipping weight | 20lb (9.1kg) |
Technology |
|
| *Specifications subject to change without notice. | |
Table with 55 specifications loaded. Use Tab key to navigate through specification labels and values.
FIND A DEALER
Visit an authorised NAD dealer to experience our products and hear the difference for yourself.
FIND A DEALER